Installing your new irrigation system ....
Greener Image Irrigation Division begins with a free consultation with the client. Our representative will inspect plumbing and the location of the water meter.
The next step will be to design the sprinkler head layout and placement. Valve locations will also be selected as well as the irrigation controller and rain sensor. All underground lines will be marked before digging begins. This includes contacting Dig-Safe before any digging work begins.
- The starting point of your irrigation system will be close to the water meter to ensure the correct amount of pressure out to the sprinklers.
- Preventing back flow is a PVB, Pressure Vacuum Breaker
- Copper, PVC and Poly pipes are used to build your irrigation system
- Control Wire is buried and the wire is made to last underground
- Valve Boxes house the control valves and are only accessible to service technicians
- The sprinkler heads are used to irrigate the lawn, and are easily adjustable
- Fixed Spray Heads are used to irrigate shrub and smaller areas
- Drip Irrigation is efficient for watering shrub and perennial plant beds
- The Controller is where the homeowner can program multiple start times and adjust the watering schedule
- Rain Sensor absorbs moisture from rain and when the sensor dries, the regular watering schedule continues
Hook-ups to the water system are done by a licensed plumber. Machines will be used to insert pipes underground with digging for head and valves done by hand. Pipes and heads in landscaped areas are installed by hand using care around your plantings.
After all the installation work is finished, any evidence of the installation will clear within a few weeks.
Contact Greener Image Landscaping today at 508-495-1181, or 508-833-4781, or email Greener Image Landscaping to schedule your free estimate!